施工升降机

价格 ¥ 230000.00
起批量 ≥1
手机专享
手机下单更便宜
物流

江苏 无锡

产品品牌

申锡

产品型号

SC200

成交\评价
采购量
- +
(999部可售)

添加中...

关闭

您可能也感兴趣:

买家服务
支付方式

申请已发出!

      已选0/0.00

      类别 升降机 品牌 申锡 型号 SC200
      产品别名 施工电梯 动力方式 电动机 重量 20(t)
      功率 3*11(kw) 工作高度 150(m) 平台承载 2000(kg)
      产品用途 垂直运输 安全器型号 SAJ40-1.2 吊笼空间(长*宽*高) 3.2*1.5*2.5

      undefined产品特点:

      ■传动机构采用三电机驱动型式,有效地降低了断齿坠落事故发生的概率,更加安全可靠。

       

      ■安全保护装置配套齐全。

       

      ■结构设计合理,在满足强度、刚度和稳定性的前提下,有效的降低了整机自重。

       

      ■在吊笼顶部设有电动吊杆,可以自行进行安装、加节接高或拆卸作业,同时方便了重大零部件的维修更换。

       

      ■吊笼加宽了200mm,使笼内净宽度达到1.48m,有效增加了吊笼容积率,进而提高垂直运输效率。

       

      ■驱动单元置于笼顶上方,进一步增大了笼内的有效空间,同时降低笼内机械振动。

       

      ■在驱动单元与吊笼连接处设有后备销轴,具有保护作用

       

       

      -   Features of SC200 Construction Hoist 

      n The hoist drive unit adopts a three motor drive mode. This multimotor drive greatly increases the contact points between pinion and rack and reduces the meshing contact stress, which contributes to smooth operation. It can also effectively reduce the probability of falling accidents caused by gear tooth fracture. 

       

      n Our construction hoist is equipped with a variety of protection devices. 

      u The patented anti-fall safety device is safe and reliable. 

      u The load limiter offers accurate weighing and anti-jamming features, ensuring the overload protection. In addition, a backup pin axle at the junction between the drive unit and cage will provide protection if the load limiter breaks. 

      u The upper and lower travel limit adopts double protection device to prevent accidents. 

      u All doors and windows of the cage are equipped with reliable electromechanical interlocking device. Hence, the cage will fail to start or stop immediately when any door or window opens abnormally. 

       

      n The hoist comes with a reliable electrical control system. The simple and clear electrical control circuit design makes it easier to operate and maintain the system. In addition, the electrical control loop adopts 36V safety voltage control, which contributes to high safety of the machine. Moreover, the switch is designed with operation and installation interlocking function, which means operation and installation can not be simultaneously performed. 

       

      n Due to the adoption of computer aided calculation, our construction hoist is reasonably designed to reduce the overall weight without compromising strength, rigidity and stability.

       

      n An electric boom is installed on the top of the cage, which can be used to perform installation, disassembly and section increasing operations if other lifting equipment is unavailable at the construction site. It also helps facilitate the maintenance and replacement of parts.

       

      n The cage is widened by 200mm, making the clear width inside the cage reach 1.5m. This allows two trolleys to be placed side by side in the cage, thereby improving the vertical transportation efficiency.

       

      n To further enlarge the effective space of the cage, the drive unit is mounted on the cage top. This also greatly reduces mechanical vibrations in the cage, creating a spacious and comfortable work environment for workers.

       

       

      -     Technical Parameters of SC200 Construction Hoist 

       

      No.

      Item

      Unit

      Parameters

      Remark

      1

      Rated load

      kg

      2*2000

      2

      Rated hoisting speed

      m/min

      36

      3

      Max. hoisting height

      m

      150

       

      4

      Motor

      Model

      /

      YZEJ-4

      Power

      kW

      2*3×11

      5

      Reducer

      Model

      TCW-16

      Gear ratio

      16:1

      5

      Anti-fall safety device

      Model

      /

      SAJ40

      Rated motion speed

      m/s

      1.2

      6

      The distance above the last tie-in

      m

      7.5

      7

      Cage clear dimension (L×W×H)

      m

      3.2×1.5×2.5

       

      8

      Cage weight

      kg

      1450

      Excludingdrive device

      9

      Standard section weight

      kg

      145

      include rack

      10

      Standard section size (L×W×H)

      mm

      650×650×1508

      11

      Tie-in spacing

      m

      9

      12

      Electric boom lifting capacity

      kg

      200

       

       

      导购推荐

      成交记录

      评价

      订购说明

      买家还在看

      申锡机械有限公司
      石勇
      经营模式 :
      生产厂家
      所在地区 :
      江苏省 无锡市 锡山区 芙蓉一路121号
      产品名
      价格